• $7.50 Flat Rate Shipping • online orders only
Your cart is empty!
Alumilite's TRANS 40 silicone mold making rubber is translucent platinum base silicone rubber that is ideal for applications that require visual inspection of the original or cast part within the mold. The TRANS 40 is a 40A durometer (medium hardness) silicone that is great for making prototype design and production tooling as well as nests, fixtures, architectural, foam, and artistic molds. It is great for making simple one and two piece molds. Vacuum degassing is highly recommended and necessary to achieve highest translucency and physical properties. The TRANS 40 reproduces extremely fine detail and dimensional accuracy. When making 2 part molds, Alumilite’s UMR mold release, Rubber to Rubber Mold Release, or Vaseline must be applied to prevent it bonding to itself. TRANS 40 is a platinum base silicone and care must be taken to eliminate the possibility of contamination from items containing tin, sulfur, vinyl, amines, and organotin salts, which may cause inhibition.
Prior to use, read all Technical Data Sheets/Instructions and Safety Data Sheets linked below.
Note: Alumilite products also available in bulk sizes ... 5 gallons, drums, and totes. Call 800-447-9344
Rubber to Rubber Mold Release 1oz